IE BUMPER
IE BUMPER

IE BUMPER
 
 
 
 
 
 
 
IE BUMPER
IE BUMPER
IE BUMPER
IE BUMPER

SLCC Staff / Faculty Eduroam Wireless Setup for Mac

 

note: Mac OS X 10.6+ with administrator rights on the computer is required.

If you need assistance, contact the SLCC Help Desk at 801-957-5555.

 

1.  Connect to the @slcc wireless network.

*Please note: @SLCC is a temporary “onboarding” wifi network, and will only be used when initially setting up eduroam. You may see an error that notifies you that you will not have internet access, do not worry about that message, again it is only to initially setup access to eduroam.

Image shows @slcc netowkr

 

2.  Open a web browser and navigate to http://www.slcc.edu/. You will be redirected to the NAC registration portal. Click on the STUDENTS, FACULTY and STAFF link. You will be redirected to the SecureW2 portal to configure your eduroam wireless network profile.

 

 Image shows Student/Staff/Faculty

3.  Your operating system should be automatically detected. Click the JoinNow button to download the package.

Image shows Join Now

4. Go to your downloads folder, open the SLCC_WiFi_Wrapper.dmg and run the installer. Follow the onscreen prompts and use the appropriate format below.

STAFF USERNAME: username@slcc.edu

Image shows SecureW2 steps

5. After the SecureW2 package completes installation, click the Done button to be redirected back to the NAC portal to register your device. You may need to refresh your browser. Enter your username and password and click continue to download the NAC agent.

STAFF USERNAME: username@slcc.edu

Image show username and password

6. Go to your downloads folder, open the Bradford Persistent Agent package and run the installer. 

Image shows Bradford installer

7. When the agent application pops up on screen, enter your username and password. Wait for the NAC agent to reconfigure your network connection. Your device should now be successfully registered and connected to the eduroam wireless network.

STAFF USERNAME:   username@slcc.edu

 Image show Bradford username and password

8. Your web browser will be redirected to the SLCC Homepage. Your device should now be successfully registered and connected to the SLCC eduroam wireless network.

note: If your web browser fails to load the SLCC homepage, toggle your WiFi network adapter OFF/ON, wait a moment and then refresh the webpage.

Image shows SLCC.edu

 





Was this article helpful?
YesNo
Not rated